20NX , 25NX

Dimensions Figure is in proportion to 20NX 
Working range Figure is in proportion to 20NX 


(unit: mm)
  A B C D E F G H
20NX 3810 1360 1810 1500 500 2410 350 250
25NX 3940 1470 1895 1550 560 2460 365 300
  I J K L M N O P
20NX 1500 700 650 50 450 175 125 750
25NX 1550 700 560 50 500 175 35 775
 

(unit: mm)
  20NX 25NX   20NX 25NX
A : Maximum. digging radius 4200 4500 D : Maximum. dumping height 2370 2750
B : Maximum. digging depth 2250 2520 E : Maximum. vertical digging depth 1750 1950
C : Maximum. digging height 3670 4050 F : Minimum. front turning radius
 At right boom swing		 1870
1540		 1940
1510

Specifications
  20NX 25NX
Performance
 STD. Bucket capacity(ISO) 0.07m3 2.5ft3 0.08m3 2.8ft3
 STD. Bucket width 450mm 17.7" 500mm 19.7"
 Operating weight 1980kg 4365lbs 2550kg 5622lbs
 Machine weight 1510kg 3439lbs 1970kg 4343lbs
 Swing speed 9.8min-1 9.8rpm 10min-1 10rpm
 Travel speed(Low/High) 2.3/4.5km/h 1.4/2.9mph 2.3/4.5km/h 1.5/2.8mph
 Gradeability 30° 30°
 Ground pressure 26kPa 3.8psi 27kPa 3.9psi
 Max. bucket digging force 19.6kN 4406lbs 19.6kN 4406lbs
Engine
 Model ISUZU 3LB1 ISUZU 3LB1
 Rated output 14.2kW(19.3PS)/2000rpm 19.0HP/2000rpm 15.7kW(21.3PS)/2220rpm 21.1HP/2220rpm
 Fuel tank capacity 33L 8.7gal 33L 8.7gal
Boom swing system
 Type Boom offset with hydraulic cylinder Boom offset with hydraulic cylinder
 Swing angle(L/R) 60°/ 80° 50°/ 90°
Hydraulic System
 Pressure 20.6Mpa 2988psi 20.6Mpa 2988psi
 Pump hydraulic flow 23.6L/min×2+17L/min 6.2gpm×2+4.5gpm 28.9L/min×2+19.1L/min 7.6gpm×2+5.0gpm
Dozer blade
 Size(Width × Height) 1500mm×350mm 59.0"×13.8" 1550mm×365mm 61.0"×14.4"
 Lift above ground 340mm 13.4" 370mm 14.6"
 Drop below ground 370mm 14.6" 395mm 15.6"

Options
 Loading bucket capacity / width (ISO) 0.09m3 / 550mm
0.08m3 / 500mm		 3.2ft3 / 21.7"
2.8ft3 / 19.7"		 0.09m3 / 550mm
 3.2ft3 / 21.7"
 Digging bucket capacity / width (ISO) *0.04m3 / 250mm
*0.05m3 / 320mm
*0.06m3 / 400mm		 *1.4ft3 / 9.8"
*1.8ft3 / 12.6"
2.1ft3 / 15.7"		 *0.04m3 / 250mm
*0.05m3 / 320mm
0.06m3 / 400mm
0.07m3 / 450mm
 *1.4ft3 / 9.8"
*1.8ft3 / 12.6"
2.1ft3 / 15.7"
2.5ft3 / 17.7"
 Long arm bucket capacity / width (ISO) 0.06m3 / 400mm 2.1ft3 / 15.7" 0.06m3 / 500mm 2.1ft3 / 15.7"
 Reinforced bucket capacity / width (ISO) 0.07m3 / 450mm 2.5ft3 / 17.7" 0.08m3 / 500mm 2.8ft3 / 19.7"
 Steel shoe width(incl.rubber pad attachment holes) 250mm 9.8" 300mm 11.8"
 Rubber padded crawler O O
 Long arm length STD+300mm STD+11.8" STD+300mm STD+11.8"
 TOPS Canopy (O)Standard (O)Standard
 Steel cab O O
 Canopy O O
 Air conditioner O O
 Power port/Auxiliary hydrauic flow(Theoretical) 43L/min 11.4gpm 48L/min 12.7gpm

*without side cutter

All rights reserved, Copyright(C) 2000,IHI Construction Machinery Limited.