30NX

Dimensions(unit: mm)   Working range(unit: mm)


A B C D E F G H
4240 1470 2060 1550 560 2470 365 300
I J K L M N O P
1550 700 555 50 500 175 30 R775

 


A : Maximum digging radius 4620 D : Maximum dumping height 2770
B : Maximum digging depth 2750 E : Maximum vertical digging depth 2050
C : Maximum digging height 4040 F : Minimum front turning radius
  At right boom swing		 2110
1650


Specifications
  30NX
Performance  
 STD. Bucket capacity(ISO) 0.08m3
 STD. Bucket width 500mm
 Operating weight 2975kg
 Machine weight 2900kg
 Swing speed 9min-1
 Travel speed(Low/High) 2.5/4.8km/h
 Gradeability 58%(30°)
 Ground pressure 27.7kPa(0.28kgf/cm2)
 Max. bucket digging force 23.5kN(2400kgf)
Engine  
 Model ISUZU 3LD1
 Rated output 18.8kW(25.5PS)/2000min-1
 Fuel tank capacity 33L
Boom swing system  
 Type Boom offset Boom offset with hydraulic cylinder
 Swing angle(L/R) 50°/ 90°
Hydraulic System  
 Pressure 20.6MPa(210kgf/cm2)
 Pump hydraulic flow 34L/min×2+19.4L/min
Dozer blade  
 Size(Width × Height) 1550mm×365mm
 Lift above/Drop below ground 370mm/390mm
Options
 Loading bucket capacity / width (ISO) 0.09m3/550mm
0.10m3/600mm
 Digging bucket capacity / width (ISO) *0.04m3/250mm
*0.05m3/320mm
0.06m3/400mm
0.07m3/450mm
 Long arm bucket capacity / width (ISO) 0.06m3/400mm
 Slide arm STD.bucket capacity / width (ISO) -
 Reinforced bucket capacity / width (ISO) 0.08m3(500mm)
 Steel shoe width 300mm
 Long arm length Standard+300mm
 Steel cabin O
 TOPS Canopy O
 Airconditioner O
 Power port/ Auxiliary hydraulic flow O(53.4L/min)
 Double element filter O

All rights reserved, Copyright(C) 2000,IHI Construction Machinery Limited.